Samsung Remote Blinking Red? Don't Panic! Here's 8 Simply Fixes (2024)

Is your Samsung remote flashing red and refusing to cooperate? Don’t worry, you’re not alone!

This can be a frustrating experience, but there are usually simple solutions to get your remote back in control.

In this guide, we’ll walk you through the most common causes of a blinking red light on your Samsung remote and provide quick fixes to get you back to enjoying your TV.

How To Fix Samsung TV remote’s Blinking Red Light?

Troubleshooting Remote Issues

The Samsung TV is not responding to the remote’s.

The TV becomes unresponsive to the remote control after it has been turned on for a period of time (normally a few minutes, sometimes less, sometimes more).

It appears that a signal is being received because the red light on the television set flashes; however, the TV does not respond to any of the pressed buttons, including the power button.

See Other Related Articles:

How to Fix Hulu Keeps Freezing on Samsung Smart TV? [8 Solutions]

How to Stream Peaco*ck On Samsung TV? (Click Here)

How to Fix Netflix Not Loading on Samsung TV (See More)

Why is my Samsung TV Remote Blinking Red?

A Samsung remote that flashes red but does not answer is highly inconvenient, so don’t panic! Knowing why your remote is behaving in this manner will help you rapidly troubleshoot and resolve the issue.

Furthermore, how do I reset the remote?

Samsung Remotes can be reset to their factory settings. Using your Samsung TV remote, perform a factory reset by pressing and holding the “B” and “C” keys on the remote until you see the remote light flash twice on the screen. Enter the code “981” on your keyboard to complete the reset. The TV remote control can now be reprogrammed to operate your television.

8 Causes of the Samsung TV remote flashing Red Light

It is extremely frustrating to have a Samsung remote that is flashing red but not responding, but don’t panic! Knowing why your remote is behaving in this manner can assist you in troubleshooting and resolving the issue more quickly.

1. Problems with Pairing

An issue with the connection or communication problem between your Samsung remote control and television is most likely to cause the red blinks red on your remote control.

You must pair your Samsung remote control with your television in order for it to function properly. During the initial setup, the remote will automatically pair with the television, and this pairing will likely last for some time.

However, your remote control may eventually become unpaired from your television and begin flashing red every time you attempt to use it at that point. If this is the case, you will need to pair it back together manually.

In contrast to other remote controls, pairing your Samsung remote is simple and quick to do.

The following are the procedures to be followed:

1. Turn on your Samsung TV by pressing the power button on the television.
2. Keep the remote control between 1-2 feet away from the television and point it towards it, aiming for the IR sensor.
3. For 5 seconds, press and hold the Return and Play/Pause buttons on your keyboard at the same time.
4. Wait for the pairing process to complete before continuing.
5. A remote and a battery icon will appear on the screen to indicate that the pairing has been successful.

2. Batteries that are weak or dying

This one may seem self-explanatory, but you’d be surprised how frequently it is overlooked.

It is also possible that your remote will not respond and will instead begin blinks red due to weak or dying batteries. It is impossible for your remote to function properly if the batteries do not have enough charge.

The quickest way to test the batteries is to use them with another device to see how they perform. The problem could come from another source if everything appears in working order.

In the majority of cases, you will not have to go through the trouble of testing the batteries. Simply replace the batteries with new, fresh ones and ensure that they are inserted in the correct direction.

The following are the steps to take when installing new batteries:

1. Turn your remote control around so that it is facing you. On the book’s back cover, you will notice a directional arrow.
2. Push the back cover of the battery compartment in the direction of the arrow to reveal the battery compartment.
3. Remove any batteries that are weak or dead.
4. Correctly install two AA batteries.
5. Test your remote control on your television. (You may need to pair your remote control with your television.)

Remember: Use Lithium Ion batteries instead of standard Alkaline batteries to get more consistent performance out of your remote control!

3. HDMI Glitch When Playing Video Games

Glitches in televisions are frequently caused by game consoles.

In the case of HDMI glitches, for example, users who immediately turn their game consoles off after using them are more likely to experience this problem.

As an alternative, you should first turn off the HDMI source before turning off the device.

Both the Xbox and the PlayStation have been experiencing the HDMI glitch, which has been occurring in both of these systems.

Try the following solutions if you own a gaming console and have recently experienced the HDMI glitch on your television:

1. Reconnect the HDMI cable and plug it in once more.
2. Turn on both your console and the television at the same time.
3. Try resetting your Samsung TV, as this will quickly reboot the software and assist in the resolution of the problem!

4. Use a different HDMI cable from the one you currently have.

An old or damaged HDMI cable may be the source of your Samsung TV’s inability to turn on properly. Wire repair is a difficult task.

To test whether the glitch is still present, you can remove the old HDMI cable and replace it with a different one.

This step will assist you in determining exactly what is causing the problem with your Samsung television.

5. Turn off and on your Samsung television, then turn it back on

One of the most straightforward methods of repairing a bug that would otherwise take much longer to diagnose is to reboot the device.

It’s always a good idea to try out simple fixes before diving into more complicated procedures.

Even if a similar problem occurs, turning off and then back on your Samsung TV is usually the first thing that should be attempted.

You will save both time and effort as a result of this. But, most importantly, it will save you money if the problem cannot be resolved and you decide to seek professional assistance.

6. Obstruction of the IR sensor

Sometimes, when you try to use your Samsung remote control, it will stop responding and will begin blinking red because there is an obstruction between the remote control and your television.

When you try to use the remote, it will almost certainly blinks red, indicating that it is transmitting signals. However, it is possible that the signals are not reaching the TV receiver because of an obstruction.

Typical living-room items such as sound bars, books, children’s blocks, and other pieces of furniture can prevent your remote from having a clear line of sight with the TV receiver, resulting in poor picture quality.

The issue may be resolved by moving these items out of the way, which will ensure that the remote control resumes normal operation.

Keep the remote pointed directly at the TV receiver to ensure that you have a clear line of sight for the best results. When using the remote control, make sure it is at least 1-2 feet away from the IR sensor when not in use.

On rare occasions, dust or dirt can become lodged in the TV sensor, preventing it from responding when you try to operate it with the remote control.

This can be corrected by gently cleaning the affected area with a cotton swab or a soft cloth. To protect the sensor from possible damage, avoid using spray cleaners or any other liquids on it.

7. Physical harm

It is possible that physical damage to your remote will cause it to stop working. It is possible that the remote control will continue to flash a red light, but it will not function due to insufficient circuit connections on the motherboard

8. Button that has become Stuck

Sometimes the remote isn’t completely broken, but only one or two buttons aren’t working properly.

Cleansing your remote regularly will help to prevent dirt, grime, and oxidation from accumulating and causing it to function improperly or not at all.

The good news is that repairing buttons that have become inoperable due to dirt, grime, or oxidation is a relatively simple process if you are willing to put in the effort.

But, before you disassemble your remote control, try this: quickly press and release each and every button on your remote control several times in rapid succession. I know it sounds silly, but go ahead and try it. Press each button as many times as you can, both in and out, to see how far you can get.

A lot of the time, this is enough to dislodge whatever it is that is causing the button to stick in your remote to work again!

The next step is to disassemble your remote control, which you can do by following these instructions:

1. Turn your remote control around so that it is facing you. You will notice a directional arrow on the back cover of the book.
2. Remove the batteries from the battery compartment by opening it.
3. The screws should be located and unscrewed by using the appropriate screwdriver size.
4. Disassemble the front cover from the back cover and reverse the process to gain access to the circuit board.
5. Remove any oxidation from the contacts by gently rubbing them with a rubber eraser.
6. Remove the rubber padding from the case and wash it in warm soapy water to disinfect the surface of the case.
7. Use an isopropyl alcohol-soaked cotton swab to clean the rubber contacts on your computer.
8. Assemble the remote and make sure all of the screws are tight.
9. Check the functionality of your remote control.

Some common Fixes when the remote blinking red

Fix#1 Replace Weak or Dying Batteries with New Batteries

This may seem apparent, but you’d be amazed how frequently it is forgotten.

Weak or failing batteries can also cause your remote to stop responding and begin glowing red. If the batteries are not fully charged, your remote will not function properly.

Inserting the batteries into another gadget is the quickest way to test them. If everything appears to be in order, the issue could be elsewhere.

The following are the processes for installing new batteries:

1. Turn your remote control around. On the reverse cover, there is a directional arrow.
2. Push the back cover in the direction of the arrow to open the battery compartment.
3. Remove any faulty or dead batteries.
4. Install two AA batteries correctly.
5. Check your remote on your TV (you may need to link it with your TV).

Fix #2: Remove Any Possible Obstructions to Your TV’s IR Sensor.

When you try to use your Samsung remote, it may stop responding and begin blinking red due of a blockage between the remote control and your TV.
When you go to use the remote, it will surely be transmitting signals. However, due to a blockage, the signals may not reach the TV receiver.

Everyday items in the living room, such as sound bars, books, vases, and furniture, can obstruct your remote’s clear line of sight with the TV receiver.

Fix#3 Check for Stuck Buttons

Sometimes the remote isn’t fully broken, but one or two buttons are stuck together.
If it doesn’t work, the next step is to disassemble your remote:

1. Turn your remote control around. On the reverse cover, there is a directional arrow.
2. Remove the batteries from the battery compartment.
3. Locate and remove the screws using the appropriate screwdriver size.
4. To gain access to the circuit board, separate the front and rear covers.
5. Gently wipe the contacts with a rubber eraser to remove any oxidation.
6. Remove the case’s rubber padding and wash it in warm soapy water.

Fix #4 Restart Your Remote Control

The method of resetting a broken Samsung remote control is simple and quick. The steps are as follows:

1. Open the remote control’s battery compartment.
2. Take out the batteries.
3. Press the power button for at least 20 seconds (this will drain any residual power from your remote’s capacitors, thereby resetting it).
4. Replace the batteries.
5. Check the remote.

Ways for Repairing a Samsung remote that is flashes red.

If you have attempted all the steps listed above and none appear to be effective, consider power cycling your remote control and/or television.

It is possible that powering down your remote and television will help you resolve a variety of bugs and issues you are experiencing.

1. Restart your remote control by pressing the power button.

The process of resetting a Samsung remote control that has become unresponsive is simple and straightforward. The steps are as follows:

1. Remove the batteries from your remote control’s battery compartment.
2. Remove the batteries from the device.
3. Press and hold the power button for at least 20 seconds (this will completely drain the capacitors of any remaining power in your remote, effectively resetting it!)
4. Replace the batteries in their original locations.

2. Check the remote control.

Turn your Samsung TV off and on again.

Power cycling your Samsung TV can assist you in resolving a variety of issues. Furthermore, the procedure is both quick and straightforward.

The steps are as follows:

1. Remove your television from the wall outlet.
2. Press and hold the Power Button for at least 60 seconds (this will drain any remaining power from your TV’s capacitors, effectively resetting it completely!).

3. Reconnect the television to the wall outlet.

1. Turn on your television.
2. Check the remote control.

If power cycling the television did not resolve the problem, you might consider factory resetting it as a last resort to try to fix your remote. Be aware that your television settings will be lost, and you will need to re-register with your streaming apps.

4. Make use of the SmartThings app as a control.

Instead of waiting for your Samsung remote to arrive in the mail, you can use the Samsung SmartThings app to control your television if you are unable to get your current remote to function properly.

1. Simply download the SmartThings app from the Google Play or Apple App store, and follow the on-screen instructions to create an account.
2. Once you’ve created your account, you’ll need to connect your television to the SmartThings app by following these steps:
3. Click on the “+” sign in the upper right corner of the SmartThings app once it has been opened.
4. Select Device and then Samsung as the brand from the drop-down menu.
5. Select TV from the drop-down menu.
6. SmartThings should be able to locate your TV and begin connecting with it. You can now use your smart phone as a remote control!

Our Final Thoughts on Samsung remote Flashing red

Take a look at these solutions if your Samsung remote flashes red:

Repair your Samsung TV’s remote control with the device.

Batteries that are weak or dying should be replaced with new ones.

Remove any possible obstructions that may be obstructing the IR sensor on your television. Restart your remote control.

Power-cycle your Samsung TV, followed by a factory reset, to clear any data on it.

Purchase a replacement remote control for your vehicle.

You can also download the SmartThings app and use your phone as a temporary remote if none of the previously mentioned solutions worked for you.

Did you get the red light on your Samsung remote to stop flashing red? If so, please share your method with me in the comments section below!

FAQs

Why is my Remote Red Light Blinking Continuously?

If your remote’s red light keeps blinking continuously in English, there may be several reasons behind it. It could be due to low battery power, interference from other devices, or a malfunctioning remote. Try replacing the batteries and ensure there are no obstructions between the remote and the device it controls.

References:

• How To Troubleshoot samsung remote flashing red light? (Try This 4 Easy Fixes!)
• Samsung Remote Blinking Red? (Guaranteed Fix!) – Upgraded Home
• Samsung Remote Blinking Red [Fixed] – techvenator.com
• Remote not working and red light flashing – Samsung Community